GVZC20
Split Heat Pump
High-Efficiency Split System Heat Pump Up to 21 SEER & 10 HSPF

• High-efficiency variable-speed swing and scroll compressors (tonnage dependent)
• High-efficiency variable-speed ECM condenser fan motor
• ComfortBridge™ Communications System compatible
• Factory-provided filter drier (field installation required)
• Factory-installed suction line accumulator
• Factory-installed compressor crankcase heater
• Factory-installed high-capacity muffler
• Factory-installed high and low-pressure switches
• High-density foam compressor sound blanket
• Factory-installed sensors monitoring coil and ambient temperature
• Copeland® ComfortAlert™ built in diagnostics
• SmartShift® technology with short-cycle protection to ensure quiet, reliable defrost
• In communicating mode, only two low voltage wires to the outdoor unit are required
• Contactor with lug connection
• Customized control algorithms
• Fully charged for fifteen feet of tubing length
• AHRI Certified-ETL Listed
• Copper tube & enhanced aluminum fin coil.
• The variable speed swing or scroll compressor with inverter technology runs at from 0% to 100% capacity, depending on cooling/heating demand. This operational flexibility provides a great energy-efficient option when compared to a traditional, single-stage or two-stage units
• The top performance of a variable speed electronically commutated motor (ECM) allows for operation over a wide range of fan speeds, from 0% to 100%, depending on your airflow needs. It is a great energy-efficient option when compared to a traditional, single-speed or two-stage motors
• Designed to regulate and communicate with your ComfortBridge™ Controls System so you can remotely monitor and manage your heating and cooling system – at any time, from anywhere with just an internet connection
• Filter-driers play a pivotal role in the operation of air conditioning and refrigeration systems. A factory-provided filter-drier absorbs and filters residual system contaminants and moisture when installed on site
• Suction accumulator ensures refrigerant is ready even in extreme external temperatures
• Crankcase heater prevents condensation of refrigerant in the crankcase of a compressor
• High-capacity muffler reduces pass-through vibration noise from compressor operation
• A high-pressure switch prevents the system from operating at extremely high pressures by shutting off the compressor circuit if the pressure exceeds the designated rating.
• When a refrigeration system operates at lower than normal pressures, the low-pressure switch prevents freezing from working its way to the compressor
• High-density foam compressor blanket provides noise reduction when the compressor is in operation
  Consistent and concise monitoring helps to ensure that the system is operating efficiently, regardless of the weather
• Assists contractors in troubleshooting the system with improved diagnostic accuracy by utilizing indicator lights, seven-segment LED display, and fault code storage
• SmartShift is a time-delay defrost technology that allows for a reliable, quiet, and smooth transition when units enter defrost mode
• By simplifying the communication connection to two low voltage wires to the outdoor unit, technicians may eliminate the need to run additional thermostat wiring
• Contractors can securely connect wires with large screw lugs, allowing for quick and solid wiring
  Proprietary, self-contained sequence of actions designed to help control system operation for energy efficient performance and enhanced reliability
• Fully charged with refrigerant sufficient for 15’ of tubing length to assist with easy installation of unit
• Meets the performance requirements for AHRI certification and complies with ETL North American safety standards
• Copper coil tubing with enhanced aluminum fins increases the area for heat absorption, providing outstanding, energy-efficient heat transfer performance.

GSZV9
Split Heat Pump
High-Efficiency Split System Heat Pump

Inverter Driven
Up to 22.5 SEER2

• Diagnostic indicator lights, seven-segment LED display, and fault code storage
• Field-selectable boost mode increases compressor speed during unusually high loads
• Quiet DC outdoor fan motor
• Fully charged for 15’ of tubing length
• Field-installed bi-flow filter drier
• Variable-speed swing compressors
• High-density compressor sound blanket
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via indoor board Bluetooth with the CoolCloud™ phone and tablet application
• Goodman control algorithmic logic

Click To Get a New AC System Estimate By Text
210-716-2200

We also offer live zoom with installation experts! Just schedule it via text directly with our installation team!

GSZC18
Split Heat Pump
Up to 18 SEER / 9.5 HSPF Performance
ComfortBridge™ Technology

• Integrated communicating ComfortBridge™ Technology
• Two-stage Copeland® UltraTech scroll compressor
• SmartShift™ technology with short-cycle protection
• Expanded ComfortAlert diagnostics built in
• Factory-installed bi-flow liquid-line filter drier
• The two-stage scroll compressor runs at either 65% or 100% capacity, depending on cooling/heating demand. This operational flexibility provides a great energy-efficient option when compared to a traditional, single-stage unit.
• The top performance of an electronically commutated motor (ECM) allows for two levels of operation depending on your airflow needs. It is a great energy-efficient option when compared to a traditional, single-speed motor.
• Designed to regulate and communicate with your ComfortBridge™ Controls System so you can remotely monitor and manage your heating and cooling system at any time, from anywhere with just an internet connection.
• Filter-driers play a pivotal role in the operation of air conditioning and refrigeration systems. A factory installed filter-drier absorbs and filter”s residual system contaminants and moisture.
• Ensures refrigerant is ready even in extreme external temperatures.
• Prevents condensation of refrigerant in the crankcase of a compressor.
• Reduces pass-through vibration noise from compressor operation.
• A high-pressure switch prevents the system from operating at extremely high pressures by shutting off the compressor circuit if the pressure exceeds the designated rating.
• When a refrigeration system operates at lower than normal pressures, the low-pressure switch prevents freezing from working its way to the compressor.
• High-density foam compressor blanket provides noise reduction when the compressor is in operation.
• Consistent and concise monitoring helps to ensure that the system is operating efficiently, regardless of the weather.
• Assists contractors in troubleshooting the system with improved diagnostic accuracy by utilizing indicator lights, seven-segment LED display, and fault code storage.
• Time-delay defrost technology allows for a reliable, quiet, and smooth transition when units enter defrost mode.
  By simplifying the communication connection to two low voltage wires to the outdoor unit, technicians may eliminate the need to run additional thermostat wiring.
• Contractors can securely connect wires with large screw lugs, allowing for quick and solid wiring.
• Proprietary, self-contained sequence of actions designed to help control system operation for energy efficient performance and enhanced reliability.
• Fully charged with refrigerant sufficient for 15 of tubing length to assist with easy installation of unit.
• Meets the performance requirements for AHRI certification and complies with ETL North American safety standards.
• A straight-forward, color-coded terminal strip for non-communicating set-up helps to simplify installation.
• Copper coil tubing with enhanced aluminum fins increases the area for heat absorption, providing outstanding, energy-efficient heat transfer performance.

GSZC7
Split Heat Pump
Up to 17.2 SEER2 and 8.2 HSPF2
ComfortBridge™ Technology

• Two-Stage Copeland® UltraTech scroll compressor
• High-density foam compressor sound blanket
• Integrated communicating ComfortBridge™ technology
• Commissioning and diagnostics via indoor board Bluetooth with the CoolCloud™ phone and tablet application
• ComfortAlert™ built in diagnostics
• The two-stage scroll compressor runs at either 65% or 100% capacity, depending on cooling/heating demand. This operational flexibility provides a great energy-efficient option when compared to a traditional, single-stage unit.
• The top performance of an electronically commutated motor (ECM) allows for two levels of operation depending on your airflow needs. It is a great energy-efficient option when compared to a traditional, single-speed motor.
• Designed to regulate and communicate with your ComfortBridge™ Controls System so you can remotely monitor and manage your heating and cooling system at any time, from anywhere with just an internet connection.
• Filter-driers play a pivotal role in the operation of air conditioning and refrigeration systems. A factory installed filter-drier absorbs and filter”s residual system
• contaminants and moisture.
• Ensures refrigerant is ready even in extreme external temperatures.
• Prevents condensation of refrigerant in the crankcase of a compressor.
• Reduces pass-through vibration noise from compressor operation.
• A high-pressure switch prevents the system from operating at extremely high pressuresby shutting off the compressor circuit if the pressure exceeds the designated rating. When a refrigeration system operates at lower than normal pressures, the low-pressure switch prevents freezing from working its way to the compressor.
• High-density foam compressor blanket provides noise reduction when the compressor is in operation.
• Consistent and concise monitoring helps to ensure that the system is operating efficiently, regardless of the weather.
• Assists contractors in troubleshooting the system with improved diagnostic accuracy by utilizing indicator lights, seven-segment LED display, and fault code storage.
• Time-delay defrost technology allows for a reliable, quiet, and smooth transition when units enter defrost mode.
• By simplifying the communication connection to two low voltage wires to the outdoor unit, technicians may eliminate the need to run additional thermostat wiring.
• Contractors can securely connect wires with large screw lugs, allowing for quick and solid wiring.
• Proprietary, self-contained sequence of actions designed to help control system operation for energy efficient performance and enhanced reliability.
• Fully charged with refrigerant sufficient for 15 of tubing length to assist with easy installation of unit.
• Meets the performance requirements for AHRI certification and complies with ETL
• North American safety standards.
• A straight-forward, color-coded terminal strip for non-communicating set-up helps to simplify installation.
• Copper coil tubing with enhanced aluminum fins increases the area for heat absorption, providing outstanding, energy-efficient heat transfer performance.

GSZC16
Split Heat Pump
Up to 16 SEER / 9.5 HSPF Performance
ComfortBridge™ Technology

• Integrated communicating ComfortBridge™ Technology
• Two-stage Copeland® UltraTech scroll compressor
• SmartShift™ technology with short-cycle protection
• Expanded ComfortAlert diagnostics built in
• Factory-installed bi-flow liquid-line filter drier
• The two-stage scroll compressor runs at either 65% or 100% capacity, depending on cooling/heating demand. This operational flexibility provides a great energy-efficient option when compared to a traditional, single-stage unit.
• The top performance of an electronically commutated motor (ECM) allows for two levels of operation depending on your airflow needs. It is a great energy-efficient option when compared to a traditional, single-speed motor.
• Designed to regulate and communicate with your ComfortNet™ Controls System so you can remotely monitor and manage your heating and cooling system – at any time, from anywhere with just an internet connection.
• Filter-driers play a pivotal role in the operation of air conditioning and refrigeration systems. A factory installed filter-drier absorbs and filter”s residual system contaminants and moisture.
• Ensures refrigerant is ready even in extreme external temperatures.
• Prevents condensation of refrigerant in the crankcase of a compressor.
• Reduces pass-through vibration noise from compressor operation.
• A high-pressure switch prevents the system from operating at extremely high pressures by shutting off the compressor circuit if the pressure exceeds the designated rating.
• When a refrigeration system operates at lower than normal pressures, the low-pressure switch prevents freezing from working its way to the compressor.
• High-density foam compressor blanket provides noise reduction when the compressor is in operation.
• Consistent and concise monitoring helps to ensure that the system is operating efficiently, regardless of the weather.
• Assists contractors in troubleshooting the system with improved diagnostic accuracy by utilizing indicator lights, seven-segment LED display, and fault code storage.
• Time-delay defrost technology allows for a reliable, quiet, and smooth transition when units enter defrost mode.
  By simplifying the communication connection to two low voltage wires to the outdoor unit, technicians may eliminate the need to run additional thermostat wiring.
• Contractors can securely connect wires with large screw lugs, allowing for quick and solid wiring.
• Proprietary, self-contained sequence of actions designed to help control system operation for energy efficient performance and enhanced reliability.
• Fully charged with refrigerant sufficient for 15’ of tubing length to assist with easy installation of unit.
• Meets the performance requirements for AHRI certification and complies with ETL North American safety standards.
• A straight-forward, color-coded terminal strip for non-communicating set-up helps to simplify installation.
• Copper coil tubing with enhanced aluminum fins increases the area for heat absorption, providing outstanding, energy-efficient heat transfer performance.

GSZH5

Split Heat Pump
UP TO 15.2 SEER2 & 7.8 HSPF2

1½ to 5 Tons

• High-efficiency scroll compressor
• SmartShift® technology to
  ensure quiet reliable defrost
• Copper tube/ enhanced aluminum fin
  coil- 5mm diameter on 1.5-3.5T
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• Factory-installed high-capacity muffler
• High- and low-pressure switches
• Service valves with sweat connections
  and easy access to gauge ports
• Fully charged for 15’ of tubing length
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
• Removable grille style top design
  compliant with UL 60335-2-40
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint
  finish with 500-hour salt-spray approval
• Top and side maintenance access
• Single panel access to controls with space
  provided for field-installed accessories
• When properly anchored, meets the 2020
• Florida Building Code unit integrity
  requirements for hurricane-type winds
• (Anchor bracket kits available.)

GSZ14

Split Heat Pump
Up to 15 SEER / 9.0 HSPF Performance

• High-efficiency scroll compressor

• SmartShift™ technology to ensure quiet, reliable defrost

• Factory-installed bi-flow liquid-line filter drier

• Factory-installed suction-line accumulator

• Factory-installed compressor crankcase heater

• Energy-efficient compressors are designed to efficiently deliver indoor comfort, possibly saving on monthly energy costs.

• A single-speed permanent split capacitor (PSC) condenser fan motor is designed to provide consistent airflow for optimum system performance.

• Filter-driers play a pivotal role in the operation of air conditioning and refrigeration systems. A factory installed filter-drier absorbs and filter”s residual system contaminants and moisture.

• Ensures refrigerant is ready even in extreme external temperatures.

• Prevents condensation of refrigerant in the crankcase of a compressor.

• Reduces pass-through vibration noise from compressor operation.

• A high-pressure switch prevents the system from operating at extremely high pressures by shutting off the compressor circuit if the pressure exceeds the designated rating.

• When a refrigeration system operates at lower than normal pressures, the low-pressure switch prevents freezing from working its way to the compressor.

• Time-delay defrost technology allows for a reliable, quiet, and smooth transition when units enter defrost mode.

• Contractors can securely connect wires with large screw lugs, allowing for quick and solid wiring.
• Fully charged with refrigerant sufficient for 15’ of tubing length to assist with easy installation of unit.
• Meets the performance requirements for AHRI certification and complies with ETL North American safety standards.
• Copper coil tubing with enhanced aluminum fins increases the area for heat absorption, providing outstanding, energy-efficient heat transfer performance.

GSZB4

Split Heat Pump
Energy-Efficient Split System Heat Pump

14.3 SEER2/ 7.5 HSPF2
Energy-Efficient Compressor
SmartShift® technology

• Energy-efficient compressor
• SmartShift® technology to ensure quiet reliable defrost
• Enhanced aluminum fin coil with 5 mm diameter copper tubes in 1.5- to 3.5-ton
• Single-speed PSC condenser fan motor
• Factory-installed bi-flow liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• Ground lug connection
• AHRI Certified; ETL Listed
• Factory-installed high-capacity muffler
• High- and low-pressure switches
• Service valves with sweat connections and easy access to gauge ports
• Fully charged for 15’ of tubing length
• Contactor with lug connection

GSZM4
Multi-Family Split System Heat Pump
14.3 SEER2/ 7.5 HSPF2/ 1.5-3.0 Tons
High-efficiency scroll compressor
SmartShift® technology

• High-efficiency scroll compressor
• SmartShift® technology to ensure quiet reliable defrost
• Enhanced aluminum fin coil with 5 mm diameter copper tubes in 1.5- to 3.5-ton
• Single-speed PSC condenser fan motor
• Factory-installed bi-flow liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• AHRI Certified; ETL Listed
• Factory-installed high-capacity muffler
• High- and low-pressure switches
• Service valves with sweat connections and easy access to gauge ports
• Fully charged for 15’ of tubing length
• Contactor with lug connection
• Ground lug connection

GSZ16

Split Heat Pump
Up to 16 SEER / 9.0 HSPF Performance

• High-efficiency scroll compressor

• SmartShift™ technology to ensure quiet, reliable defrost

• Factory-installed bi-flow liquid line filter drier

• High-and low-pressure switches

• Factory-installed compressor crankcase heater

   

• Energy-efficient compressors are designed to efficiently deliver indoor comfort, possibly saving on monthly energy costs.

• A single-speed permanent split capacitor (PSC) condenser fan motor is designed to provide consistent airflow for optimum system performance.

• Filter-driers play a pivotal role in the operation of air conditioning and refrigeration systems. A factory installed filter-drier absorbs and filter”s residual system contaminants and moisture.

• Ensures refrigerant is ready even in extreme external temperatures.

• Prevents condensation of refrigerant in the crankcase of a compressor.

• Reduces pass-through vibration noise from compressor operation.
  A high-pressure switch prevents the system from operating at extremely high pressures by shutting off the compressor circuit if the pressure exceeds the designated rating.

• When a refrigeration system operates at lower than normal pressures, the low-pressure switch prevents freezing from working its way to the compressor.

• Time-delay defrost technology allows for a reliable, quiet, and smooth transition when units enter defrost mode.

• Contractors can securely connect wires with large screw lugs, allowing for quick and solid wiring.

• Fully charged with refrigerant sufficient for 15’ of tubing length to assist with easy installation of unit.

• Meets the performance requirements for AHRI certification and complies with ETL North American safety standards.

• Copper coil tubing with enhanced aluminum fins increases the area for heat absorption, providing outstanding, energy-efficient heat transfer performance.